-
3.20mm x 90mm x 50mm x 8mm Z2 end mill with step shank drill point, Carbide
€307.62Cutting diameter, 3.2mm Overall length,90mm Cutting length, 50mmsample052 03 028 -
-
-
650mm x 5.0/4.0mm x 30mm x 130Z Sawblade, Triple Cut Tooth, Carbide Tipped
€834.96Material: Outer diameter- 650mm Blade thickness at carbide teeth- 5mm Blade thickness at core- 4mm Ce080 80 505 -
-
500mm x 4.0mm -3.4mm x 30mm x 110Z Sawblade, neg. Triple Cut Tooth, Carbide Tipped
€505.37Outer diameter, 500mm080 80 510 -
475mm x 4.0mm -3.2mm x 30mm x 110Z Sawblade, neg. Triple Cut Tooth, Carbide Tipped
€470.21Outer diameter, 475mm080 80 433 -
Lubricant Cutting and Grinding Oil 20 LITRE Pail (quantity 1 pails, 20 litres)
€175.78LUBE145 is clear and clean in operation andeasy to clean. LUBE145 is formulated with APIGroup II paraffinic base oil that has very lowundesirable polar and aromatic compounds and isprimarily composed...LUBE145pail1pack -
3 phase, ground and neutral separate. 208 primary, 400 secondary, 75 KVA(USA)
€4,482.39208 primary, 400 secondary 3 phase ground and neutral 75 KVA FEATURES: - Anti-vibration pads installed between the core/coil and the enclosure - Ground lug provided - Leads brought-up and solidly...MTH75H20 -
-
4.76mm x 63mm x 100mm x 6mm z2, Carbide Drill
€79.10Imperial measures are: Cut diameter: 3/16" Cut length: 2.5" Overall length: 4" Shank diameter: 6mm09 09 4763 -
-
Surface scraping blade for CN-770/20
€57.13Type a description for this product here...cscrapingbladecn770_20 -
Surface blade for CN-770/20
€61.52Type a description for this product here...ccsurfacebladecn770_20 -
5mm x 40mm x 80mm x 8mm Z2 Carbide, End Mill, FLAT
€52.73Cutting diameter, 5mm Overall length, 80mm Cutting length, 40mm09 09 0223 -
-
9.525mm x 43mm x 80mm x 10mm (3/8'' x 1.2'' x 3'' x 3/8'') 2 Flute Flat End Mill
€79.10Cutting diameter, 3/8'' Overall length, 3 Cutting length, 1.7''09 09 0002 -
3.175mm x 30mm x 70mm x 4mm z2 end mill, Carbide
€39.55Imperial measures: Cut diameter: 1/8'' Cut length: 2.36" Overall length: 2.75'' Shank: 1/8"09 09 2058 -
4.76mm x 60mm x 90mm x 5mm z2, Carbide Drill
€74.71Imperial measures are: Cut diameter: 3/16" Cut length: 2.36" Overall length: 3.5" Shank diameter: 3/16'' changed to 5mm for metric standards09 09 4748 -
4.762mm x 25mm x 100mm x 4.762mm z2, Carbide End Mill
€52.73Imperial measures are: Cut diameter: 3/16" Cut length: 1" Overall length: 4" Shank diameter: 3/16''09 09 4747
Top Categories
Bestselling
New
-
-
Haffner spare parts
€7,459.15 -